Griffin Skateboards Grennett Truck

Griffin Skateboards Grennett Truck

Base Model Grennett 4.3 - 5.0 - 6.0

$69.00

Standard Features:

Grade 8 Modified kingpin, rounded head, short thread

Grind King Insert Sleeve - Machined for Insert

Milled/Faced Baseplate

Filed Corners

Polish Pivot

Faced Hangers

Faced Hardware mounting holes

Paint & Stamping

Copper Speedrings

PVC Fixed Spherical

Nylon washer / Grade 8 Flat washer

Hourglassed Stock Bennett Bushing

Griffin Grease

Bennett 6.0 - Additional $5.00

Fully Machined Model Grennett 4.3 - 5.0 - 6.0

$120.00

(Includes Everything in Base Model +)

Stainless Steel modified kingpin, 2 1/4"

Old School large axle nuts (thicker nut = more threads)

Milled Hangers - 1/4" off each side

Milled Bushing Seats

Baseplate bottom is Faced

Delrin Pivot Cup

Fixed Delrin Spherical

Griffin Grease

Bennett 6.0 - Additional $5.00

Inverted Kingpin - Deadbolt

$20.00

NOS-1980's Deadbolt Grade 8 Mushroom head/allen bolt. Baseplate is custom machined out 1/4" to accept Grind King Insert nut. Minimize Kingpin hangups due to inverting and the shorter length & rounded bolt head.
(1) Includes custom machining and installation

Inverted - Gullwing Stainless Steel SS-Bolt

$25.00

Made by the orginal Gullwing truck company in the late 1980's. The kingpin was a little heavy for the industry at the time. These kingpins are the very best of the old school to make the Bennett truck work at its very best in performance and turn. it takes alittle more machine work to make this kingpin fit, but it's worth it.
(1) Includes custom machining and installation

Gullwing Stainless Steel Pro III (2 1/4") Kingpin

$25.00

Made in the late 1980's/early 90's. Gullwing kingpin would never break, but the baseplates did. These are machined deep into the Bennett baseplate and is 1/16th shorter than the stock kingpin.
(1) Includes custom machining and installation

Custom Hanger Facing

$5.00

Decrease rolling resistance between bearings and the hanger.

Polished Pivot

$5.00

Less friction between pivot and pivot cup, smooth turns.

Machined Bushing Seats

$12.00

Machining the bushing seats provides smooth fit between bushings and hanger.

Baseplate Milling

$12.00

Milling the baseplate bushing seat makes it perfectly flat and a clean machined finish, this will make the washers sit true and flat with the bushings. Bottom of baseplate is machined smooth for flush fit against riser pads.

Stainless Steel Ball Pivot

$75.00

303 Stainless Steel 7/16" Ball Pivot, made specific for the Bennett truck. Wrench cuts and longer fine 32tpi threads. Solid pin and red lock tite added with the install to lock it all into the hanger. Comes with a Delrin pivot cup and Griffin Grease.

*Will only work with stock style kingpin.

Delrin Pivot Cups

$10.00

This is a Delrin machined part, the lip on the cup is made so you can use a flat head screwdriver to remove the cup. This cup is made for stock and modified truck alike.

Fixed Spherical

$9.00

This is made out of Delrin, it fits in the middle of the kingpin inside of the hanger and bushings. Works like a spherical bearing to help the truck ruen more smooth.

Griffin Grease

$2.00

Clear grease, waterproof, prevents rust and corrosion, works with plastic, rubber, metal. Used with pivots.

White Lithium Grease

$2.00

Lubricant for axles & waterproofing bearing covers.

Grennett Price Guide Fall / Winter 2011/12

Base Model Grennett 4.3 or 5.0	$69.00
Price is for one (1) truck

Fully Machined Grennett Model 4.3 or 5.0	$120.00
Price is for one (1) truck

Bennett 6.0 is avaialble upon request for an additional - $5.00

Optional Features - Added to Base Model Price. (Price Is Per Truck)

Grade 8 modified Randal style 2 1/4" short thread king pin	$20.00

Stainless steel modified Randal style 2 1/4" short threads king pin	Additional $10.00

Standard style king pin modified stainless steel Randal style 2 1/4 short treads king pin with nylon tape	$20.00

Custom Hanger Facing (Per hanger)	$5.00

Custom Hanger Facing/Milling, 1/4" removed from each side (Per hanger)	$25.00

Custom Hanger Facing/Milling, Anything over 10mm removed (Per hanger)	$35.00

Polished Pivot	$6.00

Machined Bushing Seats	$12.00

Baseplate Milling	$12.00

Stainless Steel Ball Pivot (1) Includes custom machining installation	$75.00

Hourglassed Stock Bushings with extra washers (1)	$10.00

Delrin Pivot Cups (1)	$10.00

Fixed Spherical (1)	$9.00

Copper Lock Rings (2)	$2.00

Griffin Grease	$2.00

White Lithium Grease	$2.00

Tuneup Kit For Bennett Trucks - Includes: Delrin PIvot Cup, Griffin Grease, Fixed Spherical, Copper Lock Rings	$22.00

Khiro hard pivot cups Price per cup (1)	$2.00

Khiro Bearing Spacers (custom chamfered inside edge) Price for set of (2)	$5.00